The Gearhead Thread
- coco
- JimVH from the old site
- Posts: 1495
- Joined: 08 Apr 2022, 15:54
- Location: Sweet Home Alabama
- Has thanked: 19 times
- Been thanked: 263 times
The Gearhead Thread
Stick a basinet on the top of a Gravely and you have an all-terrain stroller for BabyGoat.
I am not as cool as JimVH. Nor or you. Well, unless you ARE JimVH.
- joegoat
- The Naughty Grand Poobah
- Posts: 724
- Joined: 09 Apr 2022, 21:04
- Has thanked: 34 times
- Been thanked: 83 times
The Gearhead Thread
Based on the pictures, I tend to agree. Something is just not holding as tight as it needs to.sweetandsour wrote: ↑24 Apr 2022, 15:06I can't tell exactly what I'm looking at, but perhaps the ball joint just needs replacing, and/or something is bent. I operated one of those one summer many years ago, and mower teeth kept sheering. They had to be replaced individually, and were secured with rivet-like pins, which were removed with hammer and chisel, and new teeth secured with a new rivet that was installed with a maul with steel back-up. Lots of fun in the summer sun in a hay field in Louisiana. Good times, really. Good memories.JudgeRusty wrote: ↑24 Apr 2022, 14:15General overview pic of mower:
20220424_144746~3.jpg
Ball joint on knife in foreground. Attachment clamp not engaged in background:
20220424_144552~2.jpg
Clamp engaged- reverse view-note T bar toward knife engages clamp.
20220424_144731~2.jpg
Quando Omni Flunkus Moritati (When all else fails, play dead)
- JudgeRusty
- Sunday School Student
- Posts: 88
- Joined: 10 Apr 2022, 08:38
- Location: Alabama
- Has thanked: 7 times
- Been thanked: 18 times
The Gearhead Thread
Next I plan to take off the clamp from the Pittman rod for inspection and cleaning.joegoat wrote: ↑24 Apr 2022, 20:25Based on the pictures, I tend to agree. Something is just not holding as tight as it needs to.sweetandsour wrote: ↑24 Apr 2022, 15:06I can't tell exactly what I'm looking at, but perhaps the ball joint just needs replacing, and/or something is bent. I operated one of those one summer many years ago, and mower teeth kept sheering. They had to be replaced individually, and were secured with rivet-like pins, which were removed with hammer and chisel, and new teeth secured with a new rivet that was installed with a maul with steel back-up. Lots of fun in the summer sun in a hay field in Louisiana. Good times, really. Good memories.JudgeRusty wrote: ↑24 Apr 2022, 14:15
General overview pic of mower:
20220424_144746~3.jpg
Ball joint on knife in foreground. Attachment clamp not engaged in background:
20220424_144552~2.jpg
Clamp engaged- reverse view-note T bar toward knife engages clamp.
20220424_144731~2.jpg
I have considered simply placing a hose clamp around the joint.
-
- Usher
- Posts: 2489
- Joined: 08 Apr 2022, 03:59
- Has thanked: 277 times
- Been thanked: 300 times
The Gearhead Thread
Two different locksmiths and two different tow truck guys couldn't help, and I've resisted calling on a dealership. So, I took up the seat, got it into the back seat out of the way and was able to mostly remove the door liner out of the way. While I was digging around inside the door my wife walked up. Pull the outside door handle, I told her. She did, and pulled, and the door opened. So, now I'm just going to replace everything I can WRT to the door latch. I disconnected the battery before unplugging the airbag, just because the you tube said so, and was wondering if that reset anything; but now the inside handle seems to work, but the outside handle does not, so that's it, I'm using the shotgun approach and replacing everything. It's a 2011, so new parts won't hurt.sweetandsour wrote: ↑23 Apr 2022, 17:21The lock rod works both manually and electronically, and I can see the outer lever move, by looking down inside the door with a light. I can see the rod move when the outer door handle is pulled. And I can hear the cable pull when the inside door handle is pulled. May be the actuator, but anyway I can't work on it with the door closed. Not much help on Google, none in fact. I'll give a locksmith a try this Monday I guess, if I don't find a way tmrw.
The Indians will not bother you now, on account of ... you are touched.
- FredS
- A Rotten Mexican Woman
- Posts: 1751
- Joined: 08 Apr 2022, 06:05
- Has thanked: 43 times
- Been thanked: 516 times
The Gearhead Thread
I'd leave the door card off for a while until you're comfortable it's all working.sweetandsour wrote: ↑26 Apr 2022, 06:24Two different locksmiths and two different tow truck guys couldn't help, and I've resisted calling on a dealership. So, I took up the seat, got it into the back seat out of the way and was able to mostly remove the door liner out of the way. While I was digging around inside the door my wife walked up. Pull the outside door handle, I told her. She did, and pulled, and the door opened. So, now I'm just going to replace everything I can WRT to the door latch. I disconnected the battery before unplugging the airbag, just because the you tube said so, and was wondering if that reset anything; but now the inside handle seems to work, but the outside handle does not, so that's it, I'm using the shotgun approach and replacing everything. It's a 2011, so new parts won't hurt.sweetandsour wrote: ↑23 Apr 2022, 17:21The lock rod works both manually and electronically, and I can see the outer lever move, by looking down inside the door with a light. I can see the rod move when the outer door handle is pulled. And I can hear the cable pull when the inside door handle is pulled. May be the actuator, but anyway I can't work on it with the door closed. Not much help on Google, none in fact. I'll give a locksmith a try this Monday I guess, if I don't find a way tmrw.
Did the locksmiths try to pick the lock or use a wedge to spread the door frame away from the window and reach down with a hook to pull the latch rod? I'm certain that's how the tow truck guys tackled it and I'm surprised they couldn't get in.
If we ever get to heaven boys, it ain't because we ain't done nothin' wrong. - Kris Kristofferson
- FredS
- A Rotten Mexican Woman
- Posts: 1751
- Joined: 08 Apr 2022, 06:05
- Has thanked: 43 times
- Been thanked: 516 times
The Gearhead Thread
Hopefully taking off the couplings, springs and t-latch for a clean up does the trick. Are you sure the sickle bar moves freely in it's track? I think that ball and socket coupling is designed to pop apart if you try to mow trees or something. A worm clamp might hold it together but it might break the next weakest link.JudgeRusty wrote: ↑25 Apr 2022, 05:32Next I plan to take off the clamp from the Pittman rod for inspection and cleaning.joegoat wrote: ↑24 Apr 2022, 20:25Based on the pictures, I tend to agree. Something is just not holding as tight as it needs to.sweetandsour wrote: ↑24 Apr 2022, 15:06 I can't tell exactly what I'm looking at, but perhaps the ball joint just needs replacing, and/or something is bent. I operated one of those one summer many years ago, and mower teeth kept sheering. They had to be replaced individually, and were secured with rivet-like pins, which were removed with hammer and chisel, and new teeth secured with a new rivet that was installed with a maul with steel back-up. Lots of fun in the summer sun in a hay field in Louisiana. Good times, really. Good memories.
I have considered simply placing a hose clamp around the joint.
If we ever get to heaven boys, it ain't because we ain't done nothin' wrong. - Kris Kristofferson
- JudgeRusty
- Sunday School Student
- Posts: 88
- Joined: 10 Apr 2022, 08:38
- Location: Alabama
- Has thanked: 7 times
- Been thanked: 18 times
The Gearhead Thread
I thought the same thing, that's why I am saving the clamp notion as a last resort. As mentioned, I removed the knife and used a wire brush to shine all friction pieces during the last repair attempt. I filed the rough spots off the blades and greased the knifeFredS wrote: ↑26 Apr 2022, 13:45Hopefully taking off the couplings, springs and t-latch for a clean up does the trick. Are you sure the sickle bar moves freely in it's track? I think that ball and socket coupling is designed to pop apart if you try to mow trees or something. A worm clamp might hold it together but it might break the next weakest link.JudgeRusty wrote: ↑25 Apr 2022, 05:32Next I plan to take off the clamp from the Pittman rod for inspection and cleaning.
I have considered simply placing a hose clamp around the joint.
I pulled a string to check for true. I have ruled out some issues like the pitman arm timing as it was supposed to be in running order when last parked.
Court today, also rain, but maybe work on it tomorrow after work.
- FredS
- A Rotten Mexican Woman
- Posts: 1751
- Joined: 08 Apr 2022, 06:05
- Has thanked: 43 times
- Been thanked: 516 times
The Gearhead Thread
One wonders if it pops out when running on flat ground or only when the bar is tilted up/down (relative to the tractor and hitch) for the dam/ditch.JudgeRusty wrote: ↑26 Apr 2022, 14:20I thought the same thing, that's why I am saving the clamp notion as a last resort. As mentioned, I removed the knife and used a wire brush to shine all friction pieces during the last repair attempt. I filed the rough spots off the blades and greased the knifeFredS wrote: ↑26 Apr 2022, 13:45Hopefully taking off the couplings, springs and t-latch for a clean up does the trick. Are you sure the sickle bar moves freely in it's track? I think that ball and socket coupling is designed to pop apart if you try to mow trees or something. A worm clamp might hold it together but it might break the next weakest link.JudgeRusty wrote: ↑25 Apr 2022, 05:32
Next I plan to take off the clamp from the Pittman rod for inspection and cleaning.
I have considered simply placing a hose clamp around the joint.
I pulled a string to check for true. I have ruled out some issues like the pitman arm timing as it was supposed to be in running order when last parked.
Court today, also rain, but maybe work on it tomorrow after work.
If we ever get to heaven boys, it ain't because we ain't done nothin' wrong. - Kris Kristofferson
-
- Usher
- Posts: 2489
- Joined: 08 Apr 2022, 03:59
- Has thanked: 277 times
- Been thanked: 300 times
The Gearhead Thread
Yes, wrt the tow truck guys. One locksmith said that the rods were all engaged but the latch was just stuck, and said just keep tugging on it. When I finally got inside it and was banging around is when it finally opened. Anyway it's all put back together, but the battery is dead now, so it's on charge. I'm not supposed to be driving that truck this week for some reason.FredS wrote: ↑26 Apr 2022, 13:42I'd leave the door card off for a while until you're comfortable it's all working.sweetandsour wrote: ↑26 Apr 2022, 06:24Two different locksmiths and two different tow truck guys couldn't help, and I've resisted calling on a dealership. So, I took up the seat, got it into the back seat out of the way and was able to mostly remove the door liner out of the way. While I was digging around inside the door my wife walked up. Pull the outside door handle, I told her. She did, and pulled, and the door opened. So, now I'm just going to replace everything I can WRT to the door latch. I disconnected the battery before unplugging the airbag, just because the you tube said so, and was wondering if that reset anything; but now the inside handle seems to work, but the outside handle does not, so that's it, I'm using the shotgun approach and replacing everything. It's a 2011, so new parts won't hurt.sweetandsour wrote: ↑23 Apr 2022, 17:21
The lock rod works both manually and electronically, and I can see the outer lever move, by looking down inside the door with a light. I can see the rod move when the outer door handle is pulled. And I can hear the cable pull when the inside door handle is pulled. May be the actuator, but anyway I can't work on it with the door closed. Not much help on Google, none in fact. I'll give a locksmith a try this Monday I guess, if I don't find a way tmrw.
Did the locksmiths try to pick the lock or use a wedge to spread the door frame away from the window and reach down with a hook to pull the latch rod? I'm certain that's how the tow truck guys tackled it and I'm surprised they couldn't get in.
The Indians will not bother you now, on account of ... you are touched.
-
- Usher
- Posts: 2489
- Joined: 08 Apr 2022, 03:59
- Has thanked: 277 times
- Been thanked: 300 times
The Gearhead Thread
BTW, the nuts and bolt heads securing the seat to the floor were reverse, or exterior, torx. I'd not seen that before, and I have to wonder why GM needed to use those for the seats, and why the front took 14mm but the back took 11mm. I don't have reverse torx sockets, but I have deep sockets that did the job. Seems like it's always something. I guess that's why I'm not a mechanic for a living.sweetandsour wrote: ↑26 Apr 2022, 15:57Yes, wrt the tow truck guys. One locksmith said that the rods were all engaged but the latch was just stuck, and said just keep tugging on it. When I finally got inside it and was banging around is when it finally opened. Anyway it's all put back together, but the battery is dead now, so it's on charge. I'm not supposed to be driving that truck this week for some reason.FredS wrote: ↑26 Apr 2022, 13:42I'd leave the door card off for a while until you're comfortable it's all working.sweetandsour wrote: ↑26 Apr 2022, 06:24
Two different locksmiths and two different tow truck guys couldn't help, and I've resisted calling on a dealership. So, I took up the seat, got it into the back seat out of the way and was able to mostly remove the door liner out of the way. While I was digging around inside the door my wife walked up. Pull the outside door handle, I told her. She did, and pulled, and the door opened. So, now I'm just going to replace everything I can WRT to the door latch. I disconnected the battery before unplugging the airbag, just because the you tube said so, and was wondering if that reset anything; but now the inside handle seems to work, but the outside handle does not, so that's it, I'm using the shotgun approach and replacing everything. It's a 2011, so new parts won't hurt.
Did the locksmiths try to pick the lock or use a wedge to spread the door frame away from the window and reach down with a hook to pull the latch rod? I'm certain that's how the tow truck guys tackled it and I'm surprised they couldn't get in.
The Indians will not bother you now, on account of ... you are touched.