The Gearhead Thread
-
- Usher
- Posts: 2139
- Joined: 10 Aug 2022, 08:34
- Has thanked: 658 times
- Been thanked: 335 times
The Gearhead Thread
After eight weeks, our 2014 Passat's parts finally arrived so we can collect it from the shop where it's been collecting dust for two months, but only after paying them a $2,000 ransom.
-
- Deacon
- Posts: 3007
- Joined: 08 Apr 2022, 03:59
- Has thanked: 336 times
- Been thanked: 362 times
The Gearhead Thread
IKR? BTDT, BTW, with our Explorer, needing a new electronic power steering assist, which requires replacement of the entire steering assembly, more or less. About the same as yours, roughly $2000. I wonder what was wrong with a hydraulic power steering pump? Anyway ...
The Indians will not bother you now, on account of ... you are touched.
- michigander
- Sunday School Teacher
- Posts: 419
- Joined: 06 Jul 2022, 17:03
- Has thanked: 288 times
- Been thanked: 40 times
The Gearhead Thread
I've gotten spoiled with the electric assist steering. The precise feel and controlled assist is something that was never achieved (in my experience) with hydraulic assist. Whenever I get into a car with hydraulic assist, it just feels antiquated and sloppy.sweetandsour wrote: ↑29 May 2024, 03:08IKR? BTDT, BTW, with our Explorer, needing a new electronic power steering assist, which requires replacement of the entire steering assembly, more or less. About the same as yours, roughly $2000. I wonder what was wrong with a hydraulic power steering pump? Anyway ...
However, I have never been burdened with a $2000 repair bill, nor can I speak to how these things last compared to the old school sytems, so I might be asking the same questions in that situation.
- FredS
- A Rotten Mexican Woman
- Posts: 1901
- Joined: 08 Apr 2022, 06:05
- Has thanked: 62 times
- Been thanked: 591 times
The Gearhead Thread
Sweetandsour is just exercising his geezer prerogative to complain about newfangled technology. Carburetors, incandescent headlights, bumper jacks, and bias ply tires were also fine, until they weren't.michigander wrote: ↑29 May 2024, 07:29I've gotten spoiled with the electric assist steering. The precise feel and controlled assist is something that was never achieved (in my experience) with hydraulic assist. Whenever I get into a car with hydraulic assist, it just feels antiquated and sloppy.sweetandsour wrote: ↑29 May 2024, 03:08IKR? BTDT, BTW, with our Explorer, needing a new electronic power steering assist, which requires replacement of the entire steering assembly, more or less. About the same as yours, roughly $2000. I wonder what was wrong with a hydraulic power steering pump? Anyway ...
However, I have never been burdened with a $2000 repair bill, nor can I speak to how these things last compared to the old school sytems, so I might be asking the same questions in that situation.
If we ever get to heaven boys, it ain't because we ain't done nothin' wrong. - Kris Kristofferson
-
- Deacon
- Posts: 3007
- Joined: 08 Apr 2022, 03:59
- Has thanked: 336 times
- Been thanked: 362 times
The Gearhead Thread
That's right. Further, however, it's the "bundling" that gets me. If one were able to simply change out an electric assist unit or motor or whatever, by unplugging the old one and plugging in a new one it'd be nice. But the whole entire steering assembly must be replaced, which includes several wiring bundles, as they call it. Every light on the dashboard is lit up, including brake lights, traction lights, steering assist lights and others. The dealership never was able to clear the codes from the OBD or whatever, and finally I said just give me the car. We've been driving it for over a year now, and all of the warning lights on the dash are still lit up. I tried to clear the codes myself but they won't clear. All for one measly little PS assist motor. Now I need a drink, and a smoke.FredS wrote: ↑29 May 2024, 08:39Sweetandsour is just exercising his geezer prerogative to complain about newfangled technology. Carburetors, incandescent headlights, bumper jacks, and bias ply tires were also fine, until they weren't.michigander wrote: ↑29 May 2024, 07:29I've gotten spoiled with the electric assist steering. The precise feel and controlled assist is something that was never achieved (in my experience) with hydraulic assist. Whenever I get into a car with hydraulic assist, it just feels antiquated and sloppy.sweetandsour wrote: ↑29 May 2024, 03:08
IKR? BTDT, BTW, with our Explorer, needing a new electronic power steering assist, which requires replacement of the entire steering assembly, more or less. About the same as yours, roughly $2000. I wonder what was wrong with a hydraulic power steering pump? Anyway ...
However, I have never been burdened with a $2000 repair bill, nor can I speak to how these things last compared to the old school sytems, so I might be asking the same questions in that situation.
The Indians will not bother you now, on account of ... you are touched.
-
- Sunday School Superintendent
- Posts: 858
- Joined: 17 Apr 2022, 06:59
- Has thanked: 230 times
- Been thanked: 278 times
The Gearhead Thread
Nor sure if it's the right place, but I just bought a 4runner to replace the Explorer. Turns out that if you put a race car engine into a glorified suv and hand it to a dip stick like me, you end up with a blown supercharger and a two month wait time for parts.
I bought this thing for the exact opposite reason. V6, air cooled quarter of a million mile truck not made by an American high off his gourd on edibles.
I love the lumbering thing. Should have purchased one years ago.
I bought this thing for the exact opposite reason. V6, air cooled quarter of a million mile truck not made by an American high off his gourd on edibles.
I love the lumbering thing. Should have purchased one years ago.
-
- Usher
- Posts: 2139
- Joined: 10 Aug 2022, 08:34
- Has thanked: 658 times
- Been thanked: 335 times
The Gearhead Thread
At 6:00 AM this morning, I took Amtrak to Richmond, then BART to Colma, walked to the dealership (skirting past many of the cemeteries,the place is a necropolis after all) picked up the Passat and just arrived home.
I am tired.
I am tired.
- GaryInVA
- Sunday School Superintendent
- Posts: 502
- Joined: 08 Apr 2022, 13:57
- Has thanked: 20 times
- Been thanked: 127 times
The Gearhead Thread
My son and I finally got hold of some dry ice. Put the main bearings on ice for 12 hours, heated up the cases with a torch, and installed them.
We have pulled the rebuilt crank into the left side of the center cases and will close up the cases as soon as I get some Yamabond 4.
We have pulled the rebuilt crank into the left side of the center cases and will close up the cases as soon as I get some Yamabond 4.
“Life is like riding a bicycle. To keep your balance, you must keep moving.”
― Albert Einstein
― Albert Einstein
- GaryInVA
- Sunday School Superintendent
- Posts: 502
- Joined: 08 Apr 2022, 13:57
- Has thanked: 20 times
- Been thanked: 127 times
The Gearhead Thread
Here's what we're using to pull the crank into the main bearings. The threaded rod attaches to the end of the crank.
“Life is like riding a bicycle. To keep your balance, you must keep moving.”
― Albert Einstein
― Albert Einstein
-
- Usher
- Posts: 2139
- Joined: 10 Aug 2022, 08:34
- Has thanked: 658 times
- Been thanked: 335 times
The Gearhead Thread
My son's hammered 2017 Yaris is what I'm driving these days until the Passat gets it's horn situation fixed.
The windshield was broken so I had that replaced. The car is filthy inside and out, but I can't take it to the car wash because one of the back windows won't stay up (nor can I lock it!)
Today I silicon glued a block of wood to the interior window glass to keep it from sliding open.
The windshield was broken so I had that replaced. The car is filthy inside and out, but I can't take it to the car wash because one of the back windows won't stay up (nor can I lock it!)
Today I silicon glued a block of wood to the interior window glass to keep it from sliding open.